sale@honeybeecnc.cn
+86-15940816686
Language
简体中文
English
Français
Español
بالعربية
Productos
Corte por láser de fibras
Soldadura soldadura láser
Máquina de corte por Plasma
Dispositivo relacionado
Aplicaciones
Sobre nosotros
Tecnología básica
Servicio
Soporte técnico técnico
FAQ
Descargar
Noticias
Noticias de la empresa
Blog
Contacto
Centro de noticias
Vídeo
Company News
Exhibition
Tres tipos de relaciones de enfoque de la máquina de corte por láser.
03 Apr,2023
1. Cutting focus on the workpiece In this way we also become negative focal length, because the cutting point is not located on the surface of the cutting material or inside the cutting material, but is positioned above the cutting material. This method is mainly used with materials with high cutting thickness. In this way, the focus is on the cutting material above, mainly because the thick plate needs a large cut, otherwise the nozzle transport oxygen is very easy to appear caused by insufficient resulting in lower cutting temperature.
Más +
Causas y soluciones de la inestabilidad del arco de la máquina de corte por plasma.
¿Cómo lidiar con la mesa de trabajo de agua oxidada para cortar metales?
02 Jun,2021
How to deal with the rusty water worktable for metal cutting
Máquina de corte por plasma CNC Honeybee de diez años
30 Jun,2021
Ten years old Honeybee CNC plasma cutting machine
Cuatro formas de solucionar el exceso de quemado en el corte por láser
05 May,2021
¿Cómo evitar quemarse excesivamente al cortar chapa con láser? 1. Add cooling point at the corner When cutting metal plate with sharp corners, the position where overburning is more likely to occur is often at the sharp corners. Overburning will cut the sharp corners into round shapes. At this time, you can add a cooling point at the sharp corners, pause at the sharp corners and blow air.
¿Cómo protegerse del láser en verano? Veamos que puedo hacer
16 Jun,2021
When summer comes, the temperature rises and the rainfall is frequent. At the same time, we also remind you to give the laser cutting machine a suitable environment to spend the continuous rainy season and hot days. When the laser cooling water temperature is set lower than the dew point temperature, condensation is likely to occur. Condensation will damage the electrical and optical components of the laser, and even cause the component failure. In order to avoid condensation, the environmental conditions of the laser must be within a certain limit.